|Landscaping Gardening Information|
Pressure Washing Decks
A beautiful wooden deck, properly maintained, can add greatly to the aesthetic and resale values of a home.
Just look around, decks are almost everywhere. Not just houses but both municipal and commercial facilities use wooden decks and walkways extensively. Because of this pressure washing decks can be a great profit center for your business or even the whole business.
The great news is that decks need maintenance. As beautiful as a wooden deck can be it can be a real eyesore if not properly maintained.
Why Decks Need Maintenance
When a wood deck absorbs water the natural resins and color can be washed out over time.
The combination of wood and water creates a food source for mildew, fungus and mold promoting their growth. Wood and water combined with dirt and even air pollutiom will also contribute to the proliferation of mildew, fungus and molds. One thing to remember is that a wet deck with a thick coating of mildrew is very slick and slippery. This creates one heck of a "slip and fall" liability problem. Keep this in mind when speaking to the decision makers of commercial and municipal facilities.
There is a learning curve involved when getting proficient enough to clean/seal/restore wood decks for the public. It is best to learn on your own deck or on the decks of close friends and relatives. When learning make sure to do more than one. Different decks can present different challenges.
When organizing your project or preparing your bid make some simple observations.
Has the deck ever been sealed? Is there old sealer that needs to be stripped and reapplied?
Do I have all the chemicals, tools and equipment required for this project?
( we will include a sample list at the end of this article)
Is there any damaged or rotted wood that needs to be replaced?
( Now is a good time to measure.)
Are the any missing or loose bolts, nails or screws?
Are there any adjacent bushes or plants that need to be protected?
Are there any electrical appliances, outlets, light fixtures or telephone jacks?
Note: these will have to be sealed water tight. Remember water and electricity is a dangerous combination. Decks in upscale neighborhoods will probably contain most of these challenges. Make sure the circuit breakers will be accessible to you prior to starting.
Ok you've cleared everything from the deck and placed it far enough to be out of harms way. You've locked out the circuit breakers that provide electrical service to the deck area. Outlets, fixtures and jacks have been sealed water tight.
Close proximity plants and bushes have been protected with a clear plastic tarp.
Loose bolts. nails and screws have been tightened or replaced.with galvanized fasteners.
Rotted or damaged wood has been replaced.
Only now are you really ready to begin.
Clear the Deck of Dirt and Debris
With a stiff bristle broom or a leaf blower clear all loose dirt and debris from the surface of the deck..
What Chemicals to Use
Sodium Hydroxide ( a high caustic chemical) is very popular with professional deck cleaners. Because this chemical does most of the work very low pressures of 500-1200 PSI can be used which helps avoid the condition known as "furring".
Safety note: Always wear headgear with face shields and cartridge type respirators when working with high caustic or acidic chemicals. This is not a suggestion it's a must.
While Sodium Hydroxide is a very effective chemical it will darken or may even blacken the deck. Because of this the PH will have to be nuetralized with a mild acidic solution. Acids used are Citrus,Oxalic or Phosphoric.
These acid solutions will act as brighteners. Neutralizing the PH of a high caustic cleaner will restore a deck very close to it's original color.
Add approx. 5oz. acid to each gallon of water.
Citrus Acid- Used on hardwoods.
Oxalic Acid- Primarily used on redwoods.
Phosphoric Acid- Used when an unfinished deck has turned "gray".
I'm very hesitant to suggest a pressure level when it comes to cleaning decks because it's just so subjective. One deck will have harder wood than another and
other decks will have softer and harder areas on the same deck. In this respect only experience can really guide you. As a general rule of thumb use the least amount of pressure that will get the job done.
Test pressure on an inconspicuous area of the deck. The underside works well for this
Excessive pressure will cause a deck to "furr".This is the appearance of small hairlike fibers protruding from the wood.. Your customers will not like the way this looks and light sanding will be required to correct this condition.
Ready, Set, Go!
Soak the area to be cleaned thoroughly. This serves several purposes but most importantly, the deck must remain damp throughout the entire cleaning process.
Apply cleaning chemical with the applicator of your choice.When just starting out a pump up type sprayer will work nicely. Allow your chemical to dwell for 15-20 minutes. Do not allow to dry. If necessary spray more water or reapply chemical.
If you've sufficiently dampened the deck and haven't dawdled this shouldn't be a big problem.
Clean. Remember when cleaning use low pressure. Never clean against the grain or accross the grain. Feather each pass. The pressure used should be enough to remove dead wood but not enough to cause "furring" Experience will be your best teacher.
Rinse deck thoroughly removing all chemical. Apply nuetralizer/brightener solution, wait 10-15 minutes and rinse well again.
If you are going to seal wait 24 hours if not 48. If you chose your day well rain won't become a problem.
Sometimes "furring will become apparent even at low pressures. These short hair like fibers are the result of a "tearing" action on the wood. These will probably be gone in 2-3 weeks but your customer will want them gone sooner than later. Give them a light sanding with a bronze metal scrubbing pad. Use bronze, steel wool can leave rust stains.
What not to leave behind
Here is a general list of things to bring to your job site. Some of this may not apply to you. The point is to always work with a job list to avoid the embarrasment or expense of missing that tool you need right now.
Pressure Washer- Cold water gas machine 5.5-11HP commercial grade unit.
(Hot Washers are also used but at very low temperatures not exceeding 110F)
Hoses- Sufficient lengths of both pressure hose and supply hose.
Brooms/Blower- A stiff bristled push broom (not metal) and/or a gas powered leaf blower.
Chemical applicator - Pump-up type sprayer or Flo-Jet type sprayer
Mixing Buckets - 2or3 5 gallon plastic mixing buckets.
Mixers- Drill type chemical mixer.
Respirator- Cartridge type with spares
(When working with high caustics and acids)
Face and Eye Protection- Some type of helmet with face shield.
Cordless Drill- With phillips screwbit and chuck large enough to accomodate chemical mixer.
Hammer- If nails are required.
Deck Screws, Nails and Bolts- As required, use galvanized only.
Duct tape, Clear plastic sheeting,Cardboard- To protect areas
Extension Cords- Must be adequate length and gauge. 12 gauge minimum.
Electric Rotary Sander- With 60 and 80 grit sandpaper
Knee Pads - You didn't think you'd always be standing when sanding did you?
Remember practice makes perfect get out there and start learning.
About the Author
Randall Madon is the founder and president of ATT Pressure Supply along with a new educational resource site:
What Is One Flower Benefit That You Know Of?
The biggest flower benefit of all is the fact that flowers make you happy.Research has proven this.
Gardening and Flowers
Gardening is one of life's pleasures whether you grow flowers, vegetables or herbs; we look forward to the planting season. But whether you are new or seasoned gardener, it's important to remember a few basic things.
Landscaping Design - The Primary Principles
Principles refer to standards or prescriptions for working with or arranging various elements to produce the intended landscape design. Good landscape design follows a combination of seven principles: unity, balance, proportion, focalization or emphasis, sequence or transition, rhythm, and repetition.
How to Grow Bananas
If your grocer says, "Yes, we have no bananas. We have no bananas today," it isn't surprising since the banana is the world's second favorite fruit, surpassed in popularity only by the apple.
How to Choose the Right Bulbs for Your Spring Flower Garden
Choosing the right bulbs involves more than just selecting colors and cultivars. Timing, bulb size, and most importantly, bulb health are equally significant factors in designing your spring garden.
Storm Warnings For Ponds
California has earthquakes; we in the south and east coast have hurricanes. One thing we all share is power outages.
Tuscan Garden Design
If you're looking for a beautiful, old world garden style, then you should look into designing a Tuscan garden design. There are several different things that you can do with a Tuscan garden design, but there are a few things that you should keep in mind if you're planning on a Tuscan garden design.
How to Grow Asparagus
Asparagus is a perennial plant with erect, edible stems and tiny branches that bear even tinier flowers that become red berries that contain the black Asparagus seed. Formerly in the Liliaceae family, botanists have realized that Asparagus is in a class by itself and have repositioned its 120 species in the Asparagaceae genus.
Hand Feeding your Koi
One of the most rewarding and entertaining things about having a Koi pond is when your fish finally start eating out of your hand. There is no better way to learn each fishes' personality and temprament than to have them nuzzle your fingers when they are hungry.
Pruning the Backyard Grapevine
Proper pruning of your backyard grapevines is essential to maintain vine size, shape, and yield of the grapes. If you don't prune your vines, they will become unruly, tangled messes.
Are you looking for a truly versatile vegetable to grow and serve? Try beetroot! It has the most amazing colour and texture. Varieties range in colour from gold to deep red/purple and are delicious raw, boiled, baked, pickled and juiced.
Parsley: A Cooks Best Friend
A cook's best friend, Petroselinum crispum, commonly known as curly parsley, is used in myriad ways in the kitchen. Often discarded by diners as 'just a garnish,' parsley has many valuable nutrients including bet-carotene, calcium, iron, and Vitamins A and C in easily assimilated form.
Growing Vegetables in Containers - The Compact Solution
Container vegetable gardens are a great alternative for those that don't have access to backyards. There can be a range of reasons to grow your vegetables in containers.
Summer Pond Tips
Low Oxygen levels Kill FishUse an oxygen tester and air stones to keep your available oxygen level to at least 7.0 parts per million of dissolved oxygen in 90 degree F.
Cultivating Plants In Your Garden...What To Watch Out For
There are so many plants available for you to choose from that it's hard to know where to start. Are you looking for house plants, tropical plants or some beautiful garden plants? Green plants are not only beautiful to look at they also provide a much needed source of fresh oxygen for our breathing.
Fun, Funky Garden Plants
I have a love for funky, fun and unique garden plants. Here's one to try.
How to Grow Apples
The first thing you need to grow apples is a long-term commitment. Growing apples takes considerable time and quite a bit of work.
All about Tulip Gardens
As the curtain of winter lifts, tulips are one of the first flowers to take the spring stage. As the last drifts of snow seep into the soil, these bright signs of spring dance in the sunlight.
How To Prune Your Roses For Stunning Results
Pruning and deadheading are essential to proper rose care. Alas, there are nearly as many opinions about how and when to prune as there are roses in need of pruning.
Planning Permission Tips UK - Landscaping Schemes - Do They Add Value-Is It The Chicken Or The Egg?
Have you noticed how everything looks great at the moment - in the garden and parks I mean. Everything seems in bloom, full of colour and life.
|home | site map|